The Adhesive Spray Applicator applies an even coat of sprayable adhesive to the pavement to prepare it for preformed markings coated with pressure-sensitive adhesive. The automatic features reduce primer waste and provide easy clean-up.
Please fill out this form and someone will contact you within 24 hours.
The Primer Spray Applicator (PS-14) applies an even coat of adhesive, such as 3M™ Surface Preparation Adhesive P-50, to prepare pavement for preformed markings. Its front wheel drives a gear pump that draws adhesive from the can and sends it to the spray nozzle, so the coat stays even as you walk.
| Specification | Detail |
|---|---|
| Dimensions | 41.0″ L x 27.0″ W x 35.5″ H |
| Weight | 43 lb |
| Capacity | One 5-gallon can or two 1-gallon cans |
| Spray width | 6″ spray recommended for 4″ tape |
| Coverage | About 450 lineal feet per gallon of P-50 at that width |
Push the applicator forward to spray, and do not pull it back, which reverses the pump. For wider tape, make overlapping passes. See the primer sprayer overview or all road tape applicators. Always follow the adhesive’s safety data sheet and your local rules, and see the MUTCD for marking guidance.
Fill out the form below, and we will be in touch shortly.
